Wilson, NC → Baltimore, MD
256 mi · 5h 7m (driving)
Current Risk
Medium Risk
Heat Advisory in effect along your route
Wilson
84°
Sussex County
90°
Essex County
88°
Baltimore
85°
Trip Briefing
3 segments · 256 mi · 5h 8m
Weather
🌤️ Mainly clear
90°F, wind 2 mph
Rest Stops
9
Restrooms, Truck svc, WiFi
Clear driving conditions expected
Rest stops in this segment:
- ● Northbound Nash County Rest Area 🚻
- ● ONE9 Travel Center
- ● North Carolina Welcome Center 🚻
Weather May Slow Traffic
Active weather advisory — expect slower travel
Traffic Cameras
See recent road conditions along your route
Images are snapshots updated periodically by state DOTs. Timestamps shown in images indicate when each photo was captured.
Choose your route:
Selected Route
Via I-95 North → I-295 → I-495 → Baltimore-Washington Parkway
Cameras shown are along this computed route
Need a custom route?
I-295 / MM 013.2 / NB (VEB South Tower)
Richmond, VA ·
I-295 / MM 36.3 / NB / Cold Harbor
Richmond, VA
I-295 NB MM 38
Richmond, VA
I-295 NB MM 41.2
Richmond, VA
I-495 / MM 55.6 / NB
Fairfax, VA ·
I-495 / MM 56.4 / NB
Fairfax, VA ·
I-495 / MM 57 / SB
Fairfax, VA ·
Rest Stops Along Your Route
35 stops available
Swipe to see moreShowing 1-2 of 35
Get Weather Alerts for This Route
We'll notify you when conditions change before your trip. Never drive into a surprise storm again.
⚡ Recent Weather Events on This Route
Premium users received alerts for these conditions:
- 🌧️Aug 11: Rain advisory for afternoon departures
- ❄️Aug 9: Snow expected at higher elevations - consider earlier departure
- 🌫️Aug 6: Dense fog warning for morning travel
Don't miss the next alert →
Driving from Wilson, NC to Baltimore, MD covers 256 miles in roughly 5h 7m of drive time, crossing state lines. We track 7 live traffic cameras, 35 rest areas and 2 active weather alerts along this corridor so you can plan around them. Most drivers do this trip in one day; weather along the route matters more than the forecast at either endpoint, since you'll cross several climate zones.
7-Day Driving Outlook
Today
Aug 13
92° / 84°
No precip
Tomorrow
Aug 14
97° / 77°
No precip
Sat
Aug 15
94° / 76°
No precip
Sun
Aug 16
92° / 78°
No precip
Mon
Aug 17
100° / 80°
No precip
Tue
Aug 18
97° / 81°
No precip
Wed
Aug 19
90° / 77°
No precip
🗓️ Weekend Outlook
Saturday
Use Caution⚠️ Hazardous conditions expected - Violent rain showers
Sunday
Use Caution⚠️ Hazardous conditions expected - Violent rain showers
Plan This Route
Get hour-by-hour weather forecasts, real-time traffic, and find the optimal departure time.
🚗 Live traffic included
See if current slowdowns affect your drive time
Free • No sign-up required
Current Conditions
Wilson, NC
84°F
Wind: 4 mph
Baltimore, MD
85°F
Wind: 8 mph
Weather data updated in real-time
Driving from Wilson, NC to Baltimore, MD
The 256-mile drive from Wilson, North Carolina to Baltimore, Maryland takes approximately 5h 7m under normal conditions. Weather along this route can vary significantly, especially along coastal regions where fog and marine weather can impact visibility. Route Outlook helps you find the safest time to travel by showing you weather conditions at every point along your route, timed to when you'll actually be there.
This moderate route crosses state lines from North Carolina into Maryland, connecting Wilson and Baltimore. A drive of 256 miles means you'll pass through multiple weather zones. Conditions at your starting point may bear little resemblance to what you'll encounter halfway through the trip.
Common Weather Hazards on This Route
- Hurricane and tropical storm impacts (June through November)
Seasonal Driving Considerations
Coastal weather on this route can shift quickly. Marine fog is common during morning hours, especially in spring and fall, reducing visibility to near zero. Hurricane season (June through November) can bring extended road closures and dangerous conditions. During fair weather, coastal routes offer scenic driving — but always verify conditions with live traffic cameras before heading out.
Best Time to Drive Wilson to Baltimore
For medium-distance drives like this 256-mile route, consider starting in the early morning to arrive before afternoon storms develop. Check the 7-day forecast above to find a day with favorable conditions along the entire route.
Driving Strategy
A 256-mile drive from Wilson to Baltimore takes a significant part of the day. Plan at least one fuel and rest stop along the way. If your route crosses elevation changes or state lines, expect weather conditions to shift mid-trip. Monitor the segment-by-segment forecast rather than just checking destination weather. Starting early in the morning typically avoids afternoon storm development and rush-hour congestion near urban areas.
Pro Tip
Use Route Outlook's departure optimizer to find the best time to leave. Our 4D trajectory engine considers weather at each point along your route at the exact time you'll be there — not just at your destination. It also integrates live data from traffic cameras, DOT 511 feeds, and road weather sensors.
Frequently Asked Questions
How long is the drive from Wilson to Baltimore?
The drive is approximately 256 miles and takes about 5h 7m under normal traffic and weather conditions. Severe weather can add significant time to your trip.
What's the best day to drive this route?
Based on current forecasts, Today (Aug 13) looks ideal. Clear conditions expected along the entire route
Is it safe to drive from Wilson to Baltimore today?
Current conditions show medium risk along this route. Conditions look favorable for travel. Always stay alert and adjust speed for changing conditions.
Are there rest areas on the Wilson to Baltimore route?
Yes, there are 35 rest areas along this route. Facilities include restrooms, parking, and in some cases picnic areas and vending machines. Rest stops are spaced throughout the drive, so you'll never be too far from a break.
Can I see live traffic cameras on this route?
Yes, Route Outlook shows 7 live traffic cameras along this route, sourced from state DOT feeds. You can check road visibility, traffic flow, and pavement conditions in real time before and during your drive.
What highways does this route use?
This route primarily uses I-295, I-495. Conditions can vary between highway segments, so check live camera feeds and road condition reports for each stretch before departing.
Are there any road closures on this route right now?
No significant incidents or road closures are currently reported along this route. Conditions can change quickly — this page updates automatically with the latest data from state DOT 511 systems.
Related Driving Guides
10 Essential Winter Driving Tips for Long Road Trips
Planning a winter road trip? Here are the essential safety tips to help you navigate snow, ice, and cold weather conditions.
🧊Black Ice: The Invisible Killer on Winter Roads
Black ice forms when rain or melting snow refreezes on cold road surfaces. Here's how to spot the conditions that create it.
🛡️Road Safety Features: Real-Time Conditions for Your Route
Real-time traffic incidents from 12 states, highway message signs, road conditions, and 25,000+ traffic cameras--integrated into your route planning.
Road Trip Guides Through This Area
Great Smoky Mountains Circuit
America's Most Visited National Park and Beyond
Blue Ridge Parkway: Shenandoah to Great Smoky Mountains
America's Favorite Drive Through the Appalachians
Outer Banks: North Carolina's Barrier Islands
Wild Horses, Shipwrecks, and the Birthplace of Flight
Appalachian Mountain Towns
Charming Towns Nestled in Ancient Mountains
Explore More Routes
More routes from Wilson
More routes to Baltimore
Similar-distance drives
More routes starting in NC
Don't Drive Blind Into Weather
Route Outlook shows you conditions at every point along your route—at the exact time you'll be there.
Open Planner